Vernier LabPro User Manual download pdf (Page 19)

Vernier LabPro User’s Manual 15

1. Set up LabPro for remote data collection.

a. Put fresh batteries in the LabPro.

b. Set up the sensors, LabPro, and Logger Pro just as you normally would to collect data in Time

Based mode.

c. Instead of clicking the

button, choose Remote  Remote Setup from the Experiment

menu.

A summary of your setup will be displayed.

d. Click

to prepare the LabPro.

e. Disconnect the LabPro from the computer.

f. If it has not already been saved, save the experiment file so it can be used to later retrieve the data

from LabPro.

2. Collect data.

a. When you are ready to collect data, press the START/STOP button.

b. When data collection is complete, the yellow LED will flash briefly. You can also stop data

collection early by pressing the START/STOP button before data collection is finished.

3. Retrieve the data.

a. Start Logger Pro if it is not already running. Choose Continue Without Interface in the Connect

LabPro dialog and click

b. Open the experiment file used to set up LabPro.

c. Attach LabPro to the computer.

d. If a Remote Data Available window appears, click the YES button. Click

which accepts

the default to retrieve remote data into the current file. If a window does not appear when the

interface is reconnected, choose Remote  Retrieve Remote Data from the Experiment menu and

follow the on-screen instructions.

e. The data will be retrieved.

Set Up for Selected Events Method

Using the Set Up for Selected Events Method, you will use a computer to set up LabPro, detach it to

collect individual data points, and then reattach it to retrieve the data. With this method, you can use any

sensor (not just auto-ID), and collect individual data points whenever you press the START/STOP button.

1. Set up LabPro for remote data collection

a. Put fresh batteries in the LabPro.

b. Set up the sensors, LabPro, and Logger Pro just as you normally would to collect data using the

Selected Event mode.

c. Instead of clicking the

button, choose Remote  Remote Setup from the Experiment

menu. A summary of your setup will be displayed.

d. Click

to prepare the LabPro.

e. Disconnect the LabPro from the computer.

f. If it has not already been saved, save the experiment file so it can be used to later retrieve the data

from LabPro.

2. Collect data. Every time you press the START/STOP button, LabPro will collect one data point. The

green LED will remain on and the yellow LED will flash with each reading. Repeat as often as you

want, for up to 99 readings.

Sensors that require a warm-up time may have additional on-screen instructions.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 34 35

Comments to this Manuals

No comments

Vernier LabPro User Manual Page 19

Comments to this Manuals

Related products and manuals for Equipment Vernier LabPro