Vernier LabQuest Viewer User Manual download pdf (Page 3)

Optional Settings

l To allow the LabQuest to be controlled remotely via LabQuest Viewer, select the

Allow screen control check box.

l To require a password from LabQuest Viewer in order to connect, select the

Require Password check box, tap the password entry field, and enter the desired

password.

l Ignore the option to specify a channel. This feature is no longer used.

l Ignore the option to specify a port. In most cases, the default port of 5900 works fine.

If you are unable to connect to LabQuest using the default port, contact your network

administrator to determine if a different port is required.

l Use Enable Viewer over USB when connecting via Wi-Fi is not an option. See Set up

LabQuest 2 to Communicate with LabQuest Viewer Software Over USB.

Set up LabQuest 2 to Communicate with LabQuest Viewer Software

Over USB

If you are using LabQuest Viewer software on a computer, you have the option to connect

directly to a LabQuest 2 over USB instead of Wi-Fi.

Note: This option is not available for iPad

or original LabQuest.

To set up the USB connection on LabQuest 2, follow these instructions.

1. Connect your computer running LabQuest Viewer software to the LabQuest 2 using the

cable included with LabQuest 2.

2. On LabQuest, launch the Connections app from the Home screen.

Tap the Viewer gear.

4. In the LabQuest Viewer Settings dialog, enable LabQuest Viewer (On). You can also

enable optional settings.

1 2 3 4 5 6 7 8 9 10

No comments

Vernier LabQuest Viewer User Manual Page 3